FOME FLEX HYDROPROTECT Primer, 1 l

A special primer used as a strengthening agent on old and new absorbent substrates before applying the waterproofing coating FOME FLEX HYDROPROTECT.

SKU: 01-4-2-065
Colour: Blue
Volume: 1 l
  • Indoor & Outdoor
  • Strengthen the substrate
  • Quick drying
  • Easy to apply

FOME FLEX HYDROPROTECT Primer, 1 l bottle, is a deep-penetrating primer designed to strengthen old or new absorbent surfaces before applying the waterproofing coating FOME FLEX HYDROPROTECT Membrane. The primer penetrates deep into the absorbent substrate, strengthening it, reducing its absorbency and improving the adhesion of the waterproofing membrane. This helps to create a reliable and long-lasting waterproofing system.

The waterproofing membrane can usually be applied after approximately 4 hours, allowing waterproofing work to continue on the same day. Thanks to its consistency, this primer for waterproofing membrane spreads easily over the surface and is absorbed evenly into the substrate. It can be used for surface preparation both indoor and outdoor.

Application areas:

  • For priming a surface before applying the waterproofing coating FOME FLEX HYDROPROTECT.
  • Before waterproofing bathrooms, showers, kitchens, laundries, balconies, terraces and other wet areas.
  • For old and new substrates with absorbent properties.
  • Can be used in heated floor structures.

Use for priming these surfaces:

  • Concrete;
  • Aerated concrete;
  • Plaster (cement-lime, lime, gypsum);
  • Boards (cement, gypsum, gypsum-cardboard);
  • Sandstone.

Remarks / Restrictions:

The primer cannot be used during rain or frost. Drying time depends on the type of substrate, temperature and humidity. The product is not intended for food-contact and medical applications. All given parameters are based on laboratory tests compliant with internal manufacturer’s standards and strongly depend on product hardening conditions.

 

Waterproofing walls or floors of damp rooms is important, as it protects surfaces from the damaging effects of water, oils, grease, fungi and mould. FOME FLEX HYDROPROTECT Primer is developed as part of the FOME FLEX waterproofing system, ensuring compatibility between the primer and waterproofing membrane for reliable long-term performance. By reducing substrate absorbency and improving membrane adhesion, the primer helps minimize uneven drying and supports long-lasting waterproofing performance.

 

SURFACE PREPARATION

The surface should be clean, smooth, dry, free of grease, mechanical damage and other particles that reduce adhesion.

APPLICATION

The product is ready to use. Apply the primer undiluted on low-absorbent substrates, and on absorbent substrates by diluting with water in a ratio of 1:1. Apply the product to the surface with a roller, brush or spray in an even and thin layer. Drying time up to 4 hours. Low temperatures and lack of adequate air circulation prolong the drying time.

Indidator Units Value
Consumption kg/m2 0,05-0,2
Drying time +20°C/50%rh h up to 1
Density approx. g/cm3 1
Number of layers   1-2
Application and application temp. °C +5 … +25

Product is packaged in 1 l and 5 l containers. Store up to 18 months in original sealed packaging at +5 °C to +25 °C. Protect from frost and direct sunlight. Store and transport at a temperature of not less than 5 °C.