FOME FLEX HYDROPROTECT Flex Tape can be used for floor, wall and ceiling joints, internal and external corners and pipe transitions. It is used together with the waterproofing membrane FOME FLEX HYDROPROTECT. The waterproofing tape is immersed in the first layer of the waterproofing membrane and covered with the second.
SURFACE PREPARATION
The surface should be clean, smooth, dry, free of grease, mechanical damage and other particles that reduce adhesion.
APPLICATION
The product is ready to use. Prime the surface. Wait until it dries. Then apply the first layer of FOME FLEX HYDROPROTECT waterproofing membrane on the surface. Cut an appropriate length of FOME FLEX HYDROPROTECT FLEX TAPE and dip it into the first layer of applied membrane. Press firmly against the surface so that there are no wrinkles and the membrane is fully absorbed into the tape. Apply a second layer of membrane over the submerged tape to completely cover the tape. Apply the membrane to the tape with a roller, brush or trowel.
| Indicator | Units | Value |
|---|---|---|
| Sealing zone width | mm | 120 |
| Total thickness | mm | 0,6 |
| Elongation along ( DIN EN ISO 527) | % | 106 |
| Elongation across (DIN EN ISO 527) | % | 168 |
| Water resistance ( DIN 1928 B) | bar | 3 |
| UV resistance | h | 500 |
The product is packed in 10 m. long rolls. Store in a dry, cool and closed space.