INRAL DECOR HAMMER purškiami dažai. Hammer paint is high-quality, weather-resistant, producing the impressive texture of a chisel hammer. Surfaces to be painted: metal, plastic, polystyrene, stone, clay, ceramics, glass, etc. The most common applications are toolboxes, mailboxes, fences, planters, doors, etc. The paint is waterproof, suitable for both indoor and outdoor uses. COMPLETE DRYING TIME 12 hours. YIELD: 1.5 m2. WORKING TEMPERATURE: +18 ℃ .. +25 ℃.
INRAL Aerozoliniai dekoro dažai HAMMER EFFECT, antracito
Hammer paint is high-quality, weather-resistant, producing the impressive texture of a chisel hammer. Surfaces to be painted: metal, plastic, polystyrene, stone, clay, ceramics, glass, etc. Commonly used for painting tool boxes, mailboxes, fences, pots, etc.
- Nostalgic hammer effect
- Resistant to weathering
- Unique effect to give objects a special appearance
The painted surface must be clean, dry and grease-free. Shake the can vigorously for about 2 minutes. Spraying distance 15-25 cm. Test the paint in an inconspicuous place to check compatibility and colour tone. For best results, 2-3 coats are recommended. The paint dries after 24 hours. For outdoor applications, it is recommended to use on INRAL GROUND or INRAL PLASTIC PRIMER. After use, turn the can upside down and spray the valve until empty.
| Index | Value |
|---|---|
| RAL code | – |
| Colour | Anthracite |
| Gloss | glossy |
| Base | nitro resins |
| Drying time (+20 °C) | 12 h |
| Coating with 1 can, 1 layer (400 ml) | 1,5 m2 |
| Recommended number of layers | 2-3 |
| Temperature resistance (indicative) | -15 – +60 °C (short changes up to +110 ° C tolerated) |
| Suitable for surfaces | Various: metal, wood, plastic, polystyrol, stone, clay, ceramics, glass, cardboard, paper |
| Applications | Toolboxes, mailboxes, fences, railings, planters, doors, panels and boards |
| Priming | Recommended |
| Coating with other layers | any time |
| Mandatory conditions of use | Follow the label information |
| Volume | 400 ml |
| Expiry date | 5 years |
Store and transport upright in a dry place, protected from chemical and mechanical effects, at a temperature of +5 °C to +25 °C. Safety information on the packaging and statutory storage procedures must be observed. Keep the cans out of direct sunlight and away from temperatures above 50°C.
