POINT 99 montage glue

POINT 99 Montage Glue

Versatile, high-strength mounting adhesive based on synthetic rubber with fast initial adhesion.

SKU: 03-1-0-299
Colour: Beige
Volume: 280 ml
  • Very high adhesion: 30 kg/cm2
  • Suitable for indoor and outdoor use
  • Excellent adhesion to many building materials
  • Water and low temperature resistant

POINT 99 Montage Glue is a versatile, high-strength mounting adhesive based on synthetic rubber with fast initial adhesion. It is designed for bonding a wide range of construction materials during repair and construction work both indoor and outdoor.

It is suitable for bonding baseboards, thresholds, panels, sockets, mineral and stone wool, ceramic tiles, carpets and other finishing elements. After hardening, it forms an elastic and extremely strong joint reaching adhesion strength of 30 kg/cm2. The adhesive is water-resistant and the beige joint can be painted after curing.

POINT 99 adhesive cures in approximately 48 hours and after curing withstands temperatures from -20 °C to +60 °C.

Excellent adhesion to:

  • Concrete and bricks;
  • Wood and OSB boards;
  • Cork;
  • Plaster;
  • Gypsum;
  • Metal;
  • Ceramics;
  • Glass;
  • Hard PVC;
  • Polystyrene.

Application areas:

  • Bonding rigid PVC and wood panels and boards.
  • Bonding skirting boards, thresholds, door trims, mailboxes.
  • Bonding thermal insulation and sound insulation materials.
  • Bonding rosettes and polyurethane cornices.
  • Bonding ceramic tiles.

Limitation:

The adhesive is not suitable for bonding mirrors.

POINT 99 Montage Glue – combines high adhesion strength, fast initial adhesion and a flexible, water-resistant joint, making it suitable for bonding finishing elements and other construction materials indoors and outdoors.

Users manual – all surfaces must be free of dust, clean, free of grease and oil. Cut off the end of the cartridge tip and screw the nozzle provided with it. Insert the cartridge into the syringe gun and fill the nozzle with glue by pressing the trigger of the gun several times. Squeeze the glue on one of the surfaces to be glued with strips or dots. Press the surfaces to be glued together and separate again for 3-5 minutes. Then reconnect by pressing firmly. Application temperature from + 10°C to + 30°C. Residues of uncured glue can be wiped off with a cloth, hardened – mechanically. The film forms in 10 minutes. Fully hardens within 48 hours. Yield 300-500 g. / m2. Suitable for outdoor and indoor work. The adhesive seam can be painted on. Temperature resistance after hardening – 20°C … + 60°C.

Indicator Value Unit
Base material Synthetic rubber —
Colour Beige —
Tensile strength (adhesion force) 30 kg/cm²
Working environment temperature +10 … +30 °C
Density 1.25 g/ml
Correction time 10-15 min
Full hardening 48 h
Consumption, 4 mm seam 25 m
Dry balance 75 %
Thermal resistance after hardening -20 … +60 °C
Storage temperature +5 … +25 °C

Store upright in a dry place at a temperature of +5 °C to +25 °C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Quantity in the box – 12 pcs. Quantity on the pallet – 1728 pcs. The weight of one vial is 0.403 kg. Transport temperature from -15 °C to +35 °C.

Documents files

Related products