INRAL DECOR HAMMER spray paint, silver. Hammer paint is high-quality, weather-resistant, producing the impressive texture of a chisel hammer. Surfaces to be painted: metal, plastic, polystyrene, stone, clay, ceramics, glass, etc. The most common applications are toolboxes, mailboxes, fences, planters, doors, etc. The paint is waterproof, suitable for both indoor and outdoor uses.
Use areas:
Metal, plastic, stone, clay, ceramics, glass, etc.
Commonly used for painting tool boxes, mailboxes, fences, pots, etc.
Restrictions: Do not apply on polystyrene.
Application on synthetic paints is not recommended. Not suitable for no PP or similar plastics.
Drying times:
- Dust free: 5 – 8 min.
- Touch dry: 15 – 20 min.
- Completely dry: 10 – 15 h.
Yield:
1.5-2 m2 (from one 400 ml. can, one layer).
The painted surface must be clean, dry and grease-free. Shake the can vigorously for about 2 minutes. Spraying distance 20-25 cm. Test the paint in an inconspicuous place to check compatibility and colour tone. For best results, 2-3 coats are recommended. The paint dries after 10-15 hours.
For outdoor applications, it is recommended to use on INRAL NITRO or INRAL PLASTIC PRIMER.
After use, turn the can upside down and spray the valve until empty.
Store and transport upright in a dry place, protected from chemical and mechanical effects, at a temperature of +10 °C to +25 °C.
Safety information on the packaging and statutory storage procedures must be observed.
Keep the cans out of direct sunlight and away from temperatures above 50°C.
Shelf life: 10 years if appropriate storage provided.
