FOME FLEX 60 SECONDS Fast Fix foam adhesive, 750 ml

FOME FLEX 60 SECONDS Fast Fix foam adhesive, 750 ml

Fastest initial adhesion on the market, extra low secondary expansion foam adhesive for bonding all insulation materials and for most finishing, construction and repair applications.

SKU: 01-3-2-018
Colour: Жовтий
Volume: 750 мл
  • Adheres to the surface after 60 seconds
  • Yield per tube 12 m2 of insulated surface
  • Cutting time 10 minutes
  • Tensile strength 18 kg/cm2

FOME FLEX 60 SECONDS FAST FIX is the fastest-acting foam adhesive on the market, designed for quick and strong bonding of all insulation types and a wide range of construction and finishing materials. It offers super-fast initial adhesion in just 60 seconds, with minimal holding time and rapid curing.

Key Benefits:

  • Fastest initial adhesion: Ready to apply in just 60 seconds
  • Minimal holding time: Only 1–2 minutes depending on material size/weight
  • Quick curing: Fully cured in 15 minutes, cuttable in 10 minutes
  • High strength: Strong bonding power with 18 kg/cm² tensile strength
  • Efficient coverage: One can covers up to 95 meters (3 cm seam width) or 14 m² of surface
  • Safe to use: Meets EMICODE EC1 Plus standards, safe for human health

Main Uses:

Ideal for both professionals and DIY projects, FOME FLEX 60 SECONDS FAST FIX is perfect for:

  • Installing insulation panels (EPS, XPS, NEOPOR, PIR, PF)
  • Fixing cladding panels of any size
  • Bricklaying and masonry repair
  • Installing decorative elements, steps, skirting boards, and window sills

Excellent Adhesion To:

  • Polystyrene (EPS, XPS, NEOPOR)
  • Polyurethane (PIR) and phenolic foam (PF)
  • Concrete, masonry, and wood
  • Tiles (ceramic, stoneware)
  • Metal, plaster, OSB, and aluminum

FOME FLEX 60 SECONDS FAST FIX helps builders, contractors, and finishers work faster, cleaner, and more efficiently—cutting down labor time and transport costs.

 

Instructions for use. Shake the tube vigorously, screw on the gun. Clean and moisten the work surface thoroughly. Wetting is important as it accelerates curing. Invert the tube with the valve downwards. Rotate the valve at the end of the gun handle to adjust the flow rate of the mounting foam. Spray the adhesive seam 3 cm from the surface to be bonded. After spraying, wait 1 min. and press the adhesive material against the surface. Hold for 1-2 minutes depending on weight. Correction time: 2 min. Use at least 10% of the surface for large panels. After just 10 minutes the polyurethane adhesive will have the correct mechanical strength and the work can be continued. Ambient temperature for use +5 ℃ to +35 ℃. If the foam is used at low temperatures, warm up tube to +18 °C in warm water or a warm room. Residues of uncured foam are best cleaned with Foam Cleaner Fome Flex. Remove dried foam mechanically.

Indicator Units Certifications Value
Colour     Yellow
Yield m2   up to 12
Yield (3 cm joint) m   80
Cutting time min. FEICA TM1005 10
Tack free time min. FEICA TM1014 1
Temperature resistance after curing oC   -40…+90
Application temperature oC   -10…+35
Correction time min.   2-5
Compression strength N/mm2 FEICA OCF TM 1011 0,05
Tensile strength N/mm2 DIN 53455 0,18
Fire resistance   DIN4102 B3
Thermal conductivity ml   750

Store upright in a dry place at +5 °C to +25 °C. Shelf life 18 months from the date of manufacture, subject to storage conditions. Do not expose tubes to direct sunlight or heat above 50°C. Quantity per box 12 pcs. Quantity per pallet 840 pcs. Weight per tube 1.028 kg. Transportation temperature -5 °C to +25 ℃.

Documents files

Related products