• New
POINT 626 EPOXY METAL Epoxy Adhesive for Metal

POINT 626 EPOXY METAL Epoxy Adhesive for Metal

A fast-curing, two-component epoxy adhesive for metal, consisting of epoxy resin and hardener.

SKU: 03-4-0-626
Colour: Black
Volume: 2 x 12 ml
  • Reinforced with steel filler
  • Water-resistant after curing and suitable for outdoor use
  • Once cured, the adhesive can be painted, sanded and drilled
  • Once cured, the adhesive is resistant to water, alkalis and diluted acid solutions

POINT 626 EPOXY METAL – is a fast-curing, two-component epoxy adhesive for metal, consisting of epoxy resin and hardener. The components are mixed in equal parts, allowing strong initial adhesion to be achieved within just a few minutes. Reinforced with steel filler (stainless steel alloy), the adhesive is ideal for repairing metal parts and filling cracks.

Once fully cured, it forms an exceptionally strong, mechanically resistant layer that can be drilled, sanded and further machined. The product offers high resistance to chemicals, moisture and changing weather conditions, making it suitable for both indoor and outdoor applications.

Excellent adhesion to:

  • Steel;
  • Stainless steel;
  • Aluminium;
  • Brass;
  • Iron;
  • Tin alloys;
  • MDF;
  • Wood;
  • OSB;
  • Rigid PVC;
  • Concrete;
  • Other construction materials.

Application areas:

Can be used with all metals: steel, stainless steel, aluminium, brass, iron and tin alloys.

Suitable for repairing broken furniture, household appliances, toys and car parts, as well as pump and valve bodies.

Intended for repairing cracks and breaks in equipment, machinery and castings.

Suitable for filling holes and pits in castings.

Chemical resistance:

EXCELLENT RESISTANCE: to benzene, petrol, 10 % hydrochloric acid, kerosene, white spirit, 10 % phosphoric acid, 10 % potassium hydroxide, 10 % and 50 % sodium hydroxide, 10 % sulfuric acid, and toluene.

MODERATE RESISTANCE: to 10 % acetic acid, 50 % nitric acid, and 50 % sulfuric acid.

Limitations:

Not suitable for bonding polyethylene (PE), polypropylene (PP) and PTFE (polytetrafluoroethylene).

Surfaces must be even, clean and dry. Roughen smooth surfaces for better adhesion.

Dispense both components in equal amounts at a ratio of 1:1 and mix until a uniform, homogeneous mixture is obtained. Apply the adhesive to both surfaces to be bonded as quickly as possible and join them immediately. Apply enough adhesive to fully cover the surfaces. Join the parts and press firmly.

Fix the assembled parts and keep them from moving throughout the entire curing time (24 h).

Indicator Value Unit
Colour Black  
Density 1.1 g/cm³
Base material Epoxy resin and hardener  
Mixture working time* 4 min
Full curing time 24 h
Shore A hardness 85  
Compressive strength 1300 kg/cm²
Bond strength after curing 200 kg/cm²
Application temperature +5 … +35 °C
Temperature resistance after curing -40 … +120 °C
Volatile organic compound (VOC) content 0 %
Volume 2 × 12 ml

Store unopened in a dry place at temperatures from +10 °C to +25 °C. Shelf life – 24 months from the date of manufacture when stored in accordance with the storage requirements.

Freezing does not damage the product. If frozen, warm the product to room temperature until the resin and hardener become liquid enough to mix.

Protect the packaging from direct sunlight and heat above 40 °C.

2×12 ml plastic syringe, 12 pcs. per box.

Documents files

Related products