FOME FLEX HYDROPROTECT PRIMER is used for strengthening surface before applying the waterproofing coating FOME FLEX HYDROPROTECT. Before waterproofing bathrooms, kitchens, laundries, balconies, terraces and etc. For old and new substrates with absorbent properties such as: concrete, aerated concrete, plaster (cement-lime, lime, gypsum), boards (cement, gypsum, gypsum-cardboard), sandstone. Can be used in heated floor structures.
SURFACE PREPARATION
The surface should be clean, smooth, dry, free of grease, mechanical damage and other particles that reduce adhesion.
APPLICATION
The product is ready to use. Apply the primer undiluted on low-absorbent substrates, and on absorbent substrates by diluting with water in a ratio of 1:1. Apply the product to the surface with a roller, brush or spray in an even and thin layer. Drying time up to 4 hours. Low temperatures and lack of adequate air circulation prolong the drying time.
| Indidator | Units | Value |
|---|---|---|
| Consumption | kg/m2 | 0,05-0,2 |
| Drying time +20°C/50%rh | h | up to 1 |
| Density approx. | g/cm3 | 1 |
| Number of layers | 1-2 | |
| Application and application temp. | °C | +5 … +25 |
Product is packaged in 1 l and 5 l containers. Store up to 18 months in original sealed packaging at +5 °C to +25 °C. Protect from frost and direct sunlight. Store and transport at a temperature of not less than 5 °C.